Packinox PHE
Un échangeur de chaleur Plate and Frame Packinox Alfa Laval est le choix idéal pour les tâches de transfert de chaleur dans les procédés à grands débits, hautes températures et hautes pressions. Ses performances thermiques supérieures vous permettent d'augmenter votre efficacité énergétique, d'accroître votre rentabilité et de minimiser votre impact environnemental.
Une efficacité thermique exceptionnelle
- Faible coût d'exploitation - L'exceptionnelle récupération de chaleur permet de réaliser des économies d'énergie substantielles.
- Faibles coûts de maintenance grâce à un encrassement minimal.
- Réduction des dépenses d'investissement - Un seul Packinox peut remplacer plusieurs grands échangeurs de chaleur à faisceau tubulaire.
- Faible perte de pression.
- Une technologie fiable et éprouvée - Plus de 350 unités en service dans le monde.
Echangeur thermique à plaques et cadres Packinox PHE pour l'industrie lourde
Modèle d'échangeur thermique Packinox PHE à plaques et cadres conçu pour le captage et le stockage du carbone (CCS), le stockage d'énergie, la pétrochimie. le raffinage du pétrole, et le chauffage urbain.
Packinox est également disponible dans une configuration de type plaques soudées et calandres .
The heart of an Alfa Laval Packinox plate-and-frame heat exchanger is a fully welded bundle of heat transfer plates. The hot and cold streams flow in alternate channels between the plates, and in opposite directions. The counter-current flow maximizes heat transfer and makes it possible to operate with crossing temperatures in a single unit.
The corrugation of the plates causes high turbulence in the media, thereby increasing heat transfer and minimizing fouling.
The overlapping welds on two of the sides of the plate bundle form solid walls. The other two walls are reinforced with side panels, held together by a large number of tie rods. This design allows an Alfa Laval Packinox plate-and-frame heat exchanger to be operated at high pressures and with a differential pressure of up to 70 bar.
A Packinox plate-and-frame heat exchanger can be configured to operate with more than two flows, meaning several media can be heated or cooled simultaneously. Each flow can have an individual number of channels and the channel gap can differ for the different media.
Unique features
Explosion Forming
High-strength plates with long, reliable lifetime
HyperCut
Unique plate design that increases reliability and reduces pressure drop
ALOnline
Digital services for maximum uptime and performance
ALOnsite
Qualified support at your facility
Packinox plate-and-shell heat exchanger
Alfa Laval Packinox is also available in a plate-and-shell configuration, which is suitable for applications with higher pressures and temperatures. The plate-and-shell model also features Alfa Laval´s patented Spray Bar system, which optimizes liquid injection in gas streams.
Raised odds for cost-effective clean coal
See how two integrated gasification combined-cycle (IGCC) plants benefit from using Alfa Laval Packinox plate-and-frame heat exchangers in their carbon capture and storage (CCS) systems.
Sustainable solutions
Imagine a more sustainable world. A world where it takes less to produce even more. A world where we efficiently meet our growing energy demands and simultaneously reduce CO2 emissions. Imagine a world where we can harness the power of natural resources, while preserving them at the same time. At Alfa Laval, we don’t just imagine this world. We’re building it – together with our customers and our partners.
